XT Audio 2300W Monoblock Class D Full-Range Amplifier – 2 Ohm

The XT Audio 2300W Class D monoblock amplifier is an efficient, one-channel bass amp that runs full-range and is stable down to 2 ohms. Rated at 2,300 watts, it pushes strong, clean power to your subwoofer stage while the Class D design keeps it running cool and easy on your electrical system. For builders wiring their subwoofers to a 2-ohm load who want a dependable, high-output monoblock, this XT Audio amp is a smart, value-driven choice.

Efficient Class D output

Class D is the go-to amplifier design for car audio bass because it converts more of your electrical system's energy into output and wastes less as heat. That efficiency lets this XT Audio 2300W amp deliver sustained, hard-hitting power in a compact chassis that fits a wide range of installs. Running full-range, it is flexible, but it is at its best driving a subwoofer stage with deep, controlled low end.

2-ohm stability for common subwoofer setups

This monoblock is stable down to 2 ohms — the impedance most single dual-voice-coil subwoofers or subwoofer pairs are wired to. That makes it an easy match for popular bass builds: wire your sub to 2 ohms, set your gains, and let the amp deliver its rated output. As a single-channel design, all 2,300 watts are dedicated to bass, so nothing is split off to other channels.

Key features

• 2,300-watt monoblock amplifier dedicated to subwoofer power
• Efficient Class D design that runs cool and conserves current
• Stable down to 2 ohms for easy matching with common subwoofer wiring
• Full-range operation for flexible system building
• Compact chassis for versatile installation
• Strong value for a high-output bass channel

Specifications

Installation and tuning

Wire your subwoofer to present a 2-ohm load to get this amplifier's rated output, and feed it with power and ground wiring sized for the current draw. Set the gain to match your source unit and avoid clipping — clean power sounds louder and is safer for your subs. Fuse the power wire near the battery, use a short, solid ground, and keep an eye on your voltage; a strong battery or charging upgrade helps the amp perform its best under heavy bass.

Why choose the XT Audio 2300W Class D (2-ohm) monoblock

If your subwoofers are wired to 2 ohms and you want efficient, reliable power, this is the version to choose. It delivers 2,300 clean watts, runs cool thanks to its Class D design, and keeps installation simple — a practical backbone for a strong daily bass system.

Frequently asked questions

Should I choose the 2-ohm or the 1-ohm version?

Pick this 2-ohm Class D model if your subwoofers are wired to a 2-ohm load. If you run a low-impedance, multi-sub setup wired to 1 ohm, choose the 1-ohm-stable version instead so the amp can deliver full power safely.

Is Class D good for subwoofers?

Yes — Class D is the preferred design for bass because it is efficient, runs cooler, and delivers strong current without wasting electrical energy, which is ideal for driving a subwoofer hard.

What can this amp power?

It is built to drive a subwoofer stage — commonly a single dual-voice-coil sub or a pair of subs wired to 2 ohms. All 2,300 watts go to one channel dedicated to your bass.

Do I need electrical upgrades?

Upgraded power and ground wiring and a healthy battery are recommended. If your lights dim or voltage sags under bass, add a stronger battery or a big-three upgrade to keep the amp fed.

What power wiring and fuse does the 2300W amp need?

Use large-gauge power and ground wire sized for the amplifier's current draw and your run length — many installs of this size use 4-gauge, with larger wire for long runs or heavier demand. Fuse the power wire within roughly 18 inches of the battery and match the amplifier's onboard fuse rating. Keep the ground short and bolted to clean, bare metal for a solid connection. Undersized wiring is one of the most common reasons an amp underperforms, so choosing an adequate gauge and a clean ground is one of the best things you can do for consistent output.

Additional system planning notes

For the XT Audio 2300W Monoblock Class D Full-Range Amplifier – 2 Ohm, the original product description above remains the primary product-specific content. Before installation, also verify the final speaker or subwoofer load, the amplifier's supported impedance, available charging-system capacity, cable size, fuse strategy and installation space. A clean car audio build depends on matching the component to the complete system rather than relying on a single specification. Plan mounting, wiring, electrical support and tuning before the vehicle is disassembled, and keep model-specific manufacturer guidance as the final reference for any specification that is not stated here. After installation, test at conservative levels, confirm that every channel and connection operates normally, and then make tuning changes one at a time. This method helps protect the equipment, simplifies troubleshooting and makes it easier to achieve consistent performance in daily use.